River Raft.gif (25894 bytes)zebeclogo.jpg (14229 bytes)Flying.gif (18050 bytes)

3_2.jpg (30632 bytes) The Worlds Best Plastic Floorboards

Our plastic floorboards are an optional floor system in select models of the Seabon, Armada, and Armada Rescue. Plastic floorboards will not delaminate, or deteriorate from Ultra-violet light, salt water or chemicals.
1) The unique interlocking tongue and groove system of the individual floorboards provide greater structural strength. This design also eliminates some of the connecting hardware found in other floor systems. Thus making the plastic floor system easier to assemble.
2) The natural Flexion of molded plastic floorboards gives our boats a smoother, softer, and safer ride without the loss of any performanace.
3) Non-slip. The raised pattern built into the molds produces a granulated surface which offers good traction even when wet.

Super Tough Hull Material

Zebec Boats are made with extremely tough material that is very hard to puncture or tear. Our fabric is made with the STS (SOL Type System) process. Producing our fabric with this method forces the outer material into all the tiny gaps in the base fabric weave to form a single homogenous material. This manufacuring process produces a lightweight, yet incredibly strong, durable, cold resistant, heat resistanct, air tight fabric with strong adhesion qualityies and U.V. stability.

3_3.jpg (19204 bytes)
1_2.jpg (22202 bytes) Quadruple Overlap Seams

Zebec seams are made with four layers of material. The tube material overlaps by 3/4". Then reinforcement layers are applied to each side of the seam. The quadruple design creates a seam that is incredibly airtight with four times the streangth of our already strong material.

3_1.jpg (7885 bytes) 2_4.jpg (7406 bytes)

 

ZEBEC CANADA (1999) INC.